IKA Works Vacstar Control

Separation, filtration, removal: The VACSTAR dry 4-chamber membrane vacuum pump is powerful, resistant to chemicals and low-maintenance. VACSTAR control is the ideal system with its integrated vacuum controller and removable display. The controller offers a suitable mode for the desired process: from automatic to manual operation, right through to pumping or an evacuation and cleaning function.

High-performance suction

VACSTAR has an excellent suction performance, with its 22 l/min at a minimum of 2 mbar.

Integrated vacuum controller with removable controller (WiCo)

Depending on the application, you can easily select your operating mode either by using the intuitive operator menu or by remote control.

For additional safety for users and environment, we recommend using the VSE 1 vacuum safety emission condenser, which prevents solvents from being released into the room air. The VSE 1 is available as accessory.

Pump rate max. (50/60Hz) [m³/h]: 1.32

Pump rate max. (50/60Hz) [l/min]: 22

Final pressure without gas ballast [mbar]: 2

Suction levels: 4

Cylinder: 4

Connection diameter suction side [mm]: 8

Connection diameter pressure side [mm]: 8

Gas ballast valve: no

Input pressure [mbar]: 2 - 1030

Boiling point detection: yes

Solvent library: yes

Analog speed vacuum control: yes

Speed adjustment: Turning knob

Speed range [rpm]: 285 - 1200

Display: TFT

Pressure unit / scale: mbar, hPa, mmHg, Torr

Vacuum sensor: yes

Vacuum sensor type: ceramic Al2O3

Pressure max. for pressure sensor [bar]: 1.2

Measurement range (absolute) [mbar]: 1 - 1030

Control range [mbar]: 1 - 1030

Resolution pressure [mbar]: 1

Measurement uncertainty [mbar]: 1

Vacuum valve: no

Venting valve: yes

Condensate trap: yes

Emission condenser: yes

Timer: yes

Noise at low. pressure [dB(A)]: 54

Material in contact with medium: Al2O3, PTFE, FPM, PPS

Housing material: alu-cast coating / thermoplastic polymer

Clean room qualified: no

Explosion proofed: no

Mode automatic: yes

Mode manual: yes

Mode pump %: yes

Mode program: yes

Dimensions (W x H x D) [mm]: 270 x 435 x 500

Weight [kg]: 14

Permissible ambient temperature [°C]: 5 - 40

Permissible relative humidity: 80% (up to 31°C), decreasing linearly to max. 50 (@40°C)

Protection class according to DIN EN 60529: IP 20

RS 232 interface: yes

USB interface: USB-B

Voltage [V]: 100 - 240

Frequency [Hz]: 50/60

Power input [W]: 140

Power input standby [W]: 1.5